Sunlite 85426-SU LED PLV Ballast Bypass Bulb, G23 Base, 700 Lumens, 1 Pack, 40K – Cool White

Replace your old fluorescent bulbs with LED, the latest lighting technology. No more flickering. No more buzzing. Instant on at full brightness with no warm up time. With a bright 700 lumen output these long-life bulbs will give you up to 50,000 hours of energy efficient light. They use only 8 watts of electricity for a low annual operating cost of $0.96 based on 3 hours/day use at $0.11/kWh. An ideal solution for many commercial and residential applications.

Note: Unlike fluorescent bulbs these LED replacements cannot be used with a ballast. You must bypass the ballast in all fixtures before installing these bulbs. Simple instructions available online or consult an electrician for more information.

  • UPGRADE TO LED – Upgrade your G23 base fluorescent bulbs with the latest LED technology. These ballast bypass bulbs provide flicker free light that comes on instantly with no warm-up time and no buzzing like florescent bulbs. The output is a bright 700 lumen light at 4000K Cool White color temperature with a CRI of 80.
  • SAVE ENERGY – Energy efficient LED technology means they cost less to operate than equivalent fluorescent bulbs. They use only 7 watts of electricity for a low annual operating cost of $0.84 based on 3 hours/day use at $0.11/kWh. They operate on 120-277 Volt electrical service.
  • LONG LIFE SPAN – A 50,000 hour life span means years of reliable service. Plus you’ll need to replace hard to reach bulbs less often saving you time and lowering maintenance costs.
  • SAFER BY DESIGN – Unlike fluorescent bulbs, these bulbs are made from shatter resistant plastic and contain no harmful chemicals. They are also UL Listed for Damp Location installation for use in many types of commercial and residential fixtures. Ideal for recessed lighting, pendants, downlights, ceiling fixtures, hallway/stairway lighting, wall sconces, bathroom fixtures and more.
  • BALLAST BYPASS REQUIRED – Unlike fluorescent bulbs these LED replacements cannot be used with a ballast. You must bypass the ballast in all fixtures before installing these bulbs. Simple instructions available online or consult an electrician for more information.

General Characteristics
Bulb Shape

PLV

Average rated hours

50000

Bulb finish

White

Base

2-Pin (G23)

Average life span years

45

Dimmable

No

Electrical Characteristics
Watts

8

Equivalent Wattage

13

Volts

120-277

Led chip manufacturer

2835

Power factor

0.8

Light Characteristics
Lumens brightness

700

Color rendering index cri

80

Emitted color

Cool White

Color temperature kelvin

4000K

Beam angle

260°

Additional Features
Safety rating mark

UL Listed – Damp Location

Ul rated enclosed fixtures

Yes

Safety rated for usa

Yes

Safety rated for canada

Yes

Product Dimensions
Mol

4.52

Diameter inches

1.5

Item weight pounds

0.160

Item dimension

(W) 1.49 (H) 4.51 (D) 1.49

Package dimension

(W) 1.7 (H) 4.8 (D) 1.7

Package weight

0.200

Product Data
Case unit rate

12

Pack size

1

Item upc

653703854267

Warranty years

5

Package type

Box

Spec Sheet